Hl-l3270cdw – Brother HL-L3230CDW Wireless Compact Printer User Manual
Page 247
Error Messages
Cause
Action
device has been configured via
DHCP.
Server Timeout, contact your
administrator.
The Brother machine cannot connect
to the server for the Store Print Log to
Network feature.
•
Make sure your server address is
correct.
•
Make sure your server is
connected to the network.
•
Make sure the machine is
connected to the network.
Wrong Date&Time, contact
your administrator.
The Brother machine does not obtain
the time from the SNTP time server.
•
Make sure the settings to access
the SNTP time server are
configured correctly in Web Based
Management.
HL-L3270CDW
Error Messages
Cause
Action
A device is
already
connected. Press
[OK].
The maximum number of mobile
devices are already connected
to the Wi-Fi Direct network when
the Brother machine is the
Group Owner (G/O).
After the current connection between your Brother
machine and another mobile device has shut down, try to
configure the Wi-Fi Direct settings again. You can confirm
the connection status by printing the Network
Configuration Report.
Authentication
error, contact
your
administrator.
Your authentication setting for
the Store Print Log to Network
feature is not correct.
•
Make sure the
Username
and
Password
in
Authentication Setting
are correct. If the username
is part of a domain, enter the username in one of the
following styles: user@domain or domain\user.
•
Make sure the SNTP time server settings are
configured correctly so the time matches the time
used for authentication by Kerberos or NTLMv2.
Connection Error
Other devices are trying to
connect to the Wi-Fi Direct
network at the same time.
Make sure there are no other devices trying to connect to
the Wi-Fi Direct network, and then try to configure the Wi-
Fi Direct settings again.
Connection Failed
The Brother machine and your
mobile device cannot
communicate during the Wi-Fi
Direct network configuration.
•
Move the mobile device closer to your Brother
machine.
•
Move your Brother machine and the mobile device to
an obstruction-free area.
•
If you are using the PIN Method of WPS, make sure
you have entered the correct PIN.
File access
error, contact
your
administrator.
The Brother machine cannot
access the destination folder for
the Store Print Log to Network
feature.
•
Make sure the stored directory name is correct.
•
Make sure the stored directory is write-enabled.
•
Make sure the file is not locked.
Log Access Error
In Web Based Management,
you have selected the
Cancel
option in the
Error
Detection Setting
of
Store
Print Log to Network
.
Wait for about 60 seconds until this message disappears
from the LCD.
No Device
When configuring the Wi-Fi
Direct network, the Brother
machine cannot find your mobile
device.
•
Make sure your machine and mobile device are in the
Wi-Fi Direct mode.
•
Move the mobile device closer to your Brother
machine.
•
Move your Brother machine and the mobile device to
an obstruction-free area.
•
If you are manually configuring the Wi-Fi Direct
network, make sure you have entered the correct
password.
242