Brother HL-L3230CDW Wireless Compact Printer - Manual (Page 335)

[All Settings] > [Network]
Level 3 Level 4 Level 5 Level 6 Descriptions
Wired LAN TCP/IP Boot Method - Choose the IP method that best suits
your needs.
IP Address - Enter the IP address.
Subnet Mask - Enter the Subnet mask.
Gateway - Enter the Gateway address.
Node Name - Enter the Node name.
WINS
Configuration - Select the WINS configuration mode.
WINS Server Primary Specify the IP address of the primary
WINS server.
Secondary Specify the IP address of the secondary
WINS server.
DNS Server Primary Specify the primary DNS server's IP
address.
Secondary Specify the secondary DNS server's IP
address.
APIPA - Allocate the IP address from the link-local
address range automatically
1 .
IPv6 - Turn the IPv6 protocol on or off. For more
detailed information, go to your model's
FAQs & Troubleshooting page on the
Brother support website at
support.brother.com .
Ethernet - - Choose the Ethernet link mode.
Wired Status - - Display the Ethernet link status.
MAC Address - - Display the MAC address of the machine.
Set to Default - - Restore wired network settings of your
machine to the factory settings.
Wired Enable - - Turn the wired interface on or off.
WLAN TCP/IP Boot Method - Choose the IP method that best suits
your needs.
IP Address - Enter the IP address.
Subnet Mask - Enter the Subnet mask.
Gateway - Enter the Gateway address.
Node Name - Enter the Node name.
WINS
Configuration - Select the WINS configuration mode.
WINS Server Primary Specify the IP address of the primary
WINS server.
Secondary Specify the IP address of the secondary
WINS server.
DNS Server Primary Specify the primary DNS server's IP
address.
Secondary Specify the secondary DNS server's IP
address.
APIPA - Allocate the IP address from the link-local
address range automatically
1 .
330