Brother HL-L3230CDW Wireless Compact Printer - Manual (Page 85)

• To use a Windows 7, Windows 8, or Windows 10 computer as a Registrar, you must register it to your
network in advance. For more information, see the instructions supplied with your wireless LAN access
point/router.
• If you use Windows 7, Windows 8, or Windows 10 as a Registrar, you can install the printer driver after
the wireless configuration by following the on-screen instructions. To install the
Full Driver & Software
Package necessary for operating your machine, insert the Brother installation disc into your computer
or go to your model's Downloads page on the Brother Solutions Center at support.brother.com .
7. Select your machine and click Next .
8. Type the PIN displayed on the machine's LCD, and then click Next .
9. (Windows 7) Select your network, and then click Next .
10. Click Close .
If your wireless device is connected successfully, the machine's LCD displays [Connected] .
You have completed the wireless network setup. To install Full Driver & Software Package necessary for
operating your device, insert the Brother installation disc into your computer or go to your model's Downloads
page on the Brother Solutions Center at support.brother.com .
Related Information
• Additional Methods of Configuring Your Brother Machine for a Wireless Network
• Wireless LAN Report Error Codes
80