Print reports – Brother HL-L3230CDW Wireless Compact Printer User Manual

Page 330

Advertising
background image

Level 1

Level 2

Level 3

Level 4

Descriptions

WLAN

WPS w/PIN Code

-

-

Configure the wireless network settings using
WPS with a PIN code.

WLAN Status

Status

-

Display the wireless Ethernet link status.

Signal

-

Display the signal condition.

Channel

-

Display the channel in use when

Status

is

Active

.

Speed

-

Display the connection speed when

Status

is

Active

.

SSID

-

Display SSID.

Comm. Mode

-

Display the current Communication mode.

MAC Address

-

-

Display the MAC address of the machine.

WLAN Enable

-

-

Turn the wireless interface on or off.

Wi-Fi
Direct

Push Button

-

-

Configure your Wi-Fi Direct network settings using
the one-button push method quickly.

PIN Code

-

-

Configure your Wi-Fi Direct network settings using
WPS with a PIN code quickly.

Manual

-

-

Configure your Wi-Fi Direct network settings
manually.

Group Owner

-

-

Set your machine as the Group Owner.

Device Info.

Device
Name

-

View your machine's device name.

SSID

-

Display the Group Owner's SSID.

IP Address

-

Display your machine's IP Address.

Status Info.

Status

-

Display the Wi-Fi Direct network status.

Signal

-

Display the current Wi-Fi Direct network signal
strength.
When your machine acts as Group Owner, the
LCD always displays

Strong

.

Channel

-

Display the channel in use when the

Status

is

G/O Active

or

Client Active

.

Speed

-

Display the connection speed when the

Status

is

G/O Active

or

Client Active

.

I/F Enable

-

-

Enable or disable the Wi-Fi Direct connection.

Network
Reset

-

-

-

Restore all network settings of your machine to the
factory settings.

1

On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’, you must manually enter an IP address from the machine's control panel.

[Print Reports]

Level 1

Level 2 Description

Printer Settings

-

Print the Printer Settings page.

Network Config

-

Print the Network Configuration Report.

Print File List

(Available only for certain models)

-

Print a list of data saved in the memory.

Drum Dot Print

-

Print the Drum Dot Check Sheet.

WLAN Report

-

Print the wireless LAN connectivity diagnosis result.

325

Advertising