Ean/jan-13, Ean/jan-13 on/off convert upc-a to ean-13, Ean/jan-13 check digit – Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner User Manual
Page 182
Advertising
166
Granit XP User Guide
EAN/JAN-13
<Default All EAN/JAN Settings>
EAN/JAN-13 On/Off
Convert UPC-A to EAN-13
When
UPC-A Converted to EAN-13
is selected, UPC-A barcodes are converted to
13 digit EAN-13 codes by adding a zero to the front. When
Do not Convert UPC-A
is selected, UPC-A codes are read as UPC-A.
EAN/JAN-13 Check Digit
This selection allows you to specify whether the check digit should be transmitted
at the end of the scanned data or not.
Default
=
On.
* On
Off
UPC-A Converted to EAN-13
* Do not Convert UPC-A
* On
Off
Advertising