Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner - Manual (Page 269)

Granit XP User Guide 253
QR Code Append *One Scan QRCAPP1 185
Swipe QRCAPP2 185
Point & Shoot QRCAPP3 185
Off QRCAPP0 185
QR Code Page QR Code Page (*3) QRCDCP## 186
DotCode Default All DotCode Settings DOTDFT 187
On DOTENA1 187
*Off DOTENA0 187
Poor Quality DotCodes Poor Quality DotCodes On DOTEXS1 187
*Poor Quality DotCodes Off DOTEXS0 187
DotCode Msg. Length Minimum (1- 2400) *1 DOTMIN#### 188
Maximum (1- 2400) *2400 DOTMAX#### 188
Digimarc Barcode Decoder Attempts (0-10) *3 DIGSTR## 188
Off DIGENA0 188
On DIGENA1 188
Uses ID Decoder then Both
Decoders DIGENA2 188
*Uses Digimarc Decoder then
Both Decoders DIGENA3 188
Uses ID Decoder then Alternates
Decoders DIGENA4 188
Uses Digimarc Decoder then
Alternates Decoders DIGENA5 188
Data Matrix Default All Data Matrix Settings IDMDFT 188
*On IDMENA1 188
Off IDMENA0 188
Direct Part Marking (DPM)
Decoding Dotpeen DPM Decoding DPMENA1 190
*Disable DPM Decoding DPMENA0 190
Reflective (Etched) DPM
Decoding DPMENA2 190
Data Matrix Msg. Length Minimum (1-3116) *1 IDMMIN#### 190
Maximum (1-3116) *3116 IDMMAX#### 190
Data Matrix Code Page Data Matrix Code Page (*51) IDMDCP## 190
MaxiCode Default All MaxiCode Settings MAXDFT 191
On MAXENA1 191
*Off MAXENA0 191
MaxiCode Msg. Length Minimum (1-150) *1 MAXMIN### 191
Maximum (1-150) *150 MAXMAX### 191
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page