Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner - Manual (Page 22)

6 Granit XP User Guide
3. If you are connecting a the base horizontally, make sure the cables are secured
in the wireways in the bottom of the cordless base and the base sits flat on a
horizontal surface.
Note: The power supply must be ordered separately, if needed.
4. Plug the serial connector into the serial port on your computer. Tighten the two
screws to secure the connector to the port.
5. Once the scanner or cordless base has been fully connected, power up the
computer.
This interface programs 115,200 baud, 8 data bits, no parity, and 1 stop bit.
Connect with RS485
A Granit XP scanner or cordless base can be connected for an IBM POS terminal
interface.
CCB22-100BT-03N Base RS232 Serial Port Connection: