Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner - Manual (Page 261)

Granit XP User Guide 245
Single Scan Data Format Change Single Scan-Primary
Data Format VSAF_0 137
Single Scan-Data Format 1 VSAF_1 138
Single Scan-Data Format 2 VSAF_2 138
Single Scan-Data Format 3 VSAF_3 138
Symbologies
All Symbologies All Symbologies Off ALLENA0 140
Codabar Default All Codabar
Settings CBRDFT 140
Off CBRENA0 140
* On CBRENA1 140
Codabar Start/Stop Char. * Don’t Transmit CBRSSX0 141
Transmit CBRSSX1 141
Codabar Check Char. * No Check Char. CBRCK20 141
Validate, But Don’t Transmit CBRCK21 141
Validate, and Transmit CBRCK22 141
Codabar Concatenation *Off CBRCCT0 142
On CBRCCT1 142
Require CBRCCT2 142
Codabar Message Length Minimum (2 - 60) *4 CBRMIN## 142
Maximum (2 - 60) *60 CBRMAX## 142
Code 39 Default All Code 39
Settings C39DFT 143
Off C39ENA0 143
*On C39ENA1 143
Code 39 Start/Stop Char. * Don’t Transmit C39SSX0 143
Transmit C39SSX1 143
Code 39 Check Char. * No Check Char. C39CK20 143
Validate, But Don’t
Transmit C39CK21 143
Validate,
and Transmit C39CK22 143
Code 39 Message Length Minimum (0 - 48) *0 C39MIN## 144
Maximum (0 - 48) *48 C39MAX## 144
Code 39 Append *Off C39APP0 144
On C39APP1 144
Code 32 Pharmaceutical (PARAF) *Off C39B320 145
On C39B321 145
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page