Beep on bel character, Trigger click, Good read and error indicators – Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner User Manual
Page 94: Beeper – good read
78
Granit XP User Guide
Beep on BEL Character
You may wish to force the scanner to beep upon a command sent from the host. If
you scan the
Beep on BEL On
barcode below, the scanner will beep every time a
BEL character is received from the host.
Default = Beep on BEL Off.
Trigger Click
To hear an audible click every time the scanner trigger is pressed, scan the
Trigger
Click On
barcode below. Scan the
Trigger Click Off
code if you don’t wish to hear
the click. (This feature has no effect on serial or automatic triggering.)
Default =
Trigger Click Off.
Good Read and Error Indicators
Beeper – Good Read
The beeper may be programmed
On
or
Off
in response to a good read. Turning this
option off only turns off the beeper response to a good read indication. All error and
menu beeps are still audible.
Default = Beeper - Good Read On.
*Beep on BEL Off
Beep on BEL On
*Trigger Click Off
Trigger Click On
Beeper - Good Read Off
* Beeper - Good Read On