Keyboard conversion – Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner User Manual

Page 45

Advertising

Granit XP User Guide

Automatic Caps Lock

is used if you change the Caps Lock key on and off. The soft-

ware tracks and reflects if you have Caps Lock on or off. This selection can only be
used with systems that have an LED that notes the Caps Lock status (AT key-
boards).

Autocaps via NumLock

barcode should be scanned in countries (e.g., Germany,

France) where the Caps Lock key cannot be used to toggle Caps Lock. The Num-
Lock option works similarly to the regular Autocaps, but uses the NumLock key to
retrieve the current state of the Caps Lock.

Emulate External Keyboard

should be scanned if you do not have an external key-

board (IBM AT or equivalent).

Note:

After scanning the Emulate External Keyboard barcode, you must power cycle your
computer.

Keyboard Conversion

Alphabetic keyboard characters can be forced to be all upper case or all lowercase.
So if you have the following barcode: “abc569GK,” you can make the output
“ABC569GK” by scanning

Convert All Characters to Upper Case

, or to “abc569gk”

by scanning

Convert All Characters to Lower Case

These settings override

Keyboard Style

selections.

Note:

If your interface is a keyboard wedge, first scan the menu code for

Automatic Caps

Lock

(page 29). Otherwise, your output may not be as expected.