Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner - Manual (Page 183)

Granit XP User Guide 167
EAN/JAN-13 Addenda
This selection adds 2 or 5 digits to the end of all scanned EAN/JAN-13 data.
Default = Off for both 2 Digit and 5 Digit Addenda.
EAN/JAN-13 Addenda Required
When Required is scanned, the scanner will only read EAN/JAN-13 barcodes that
have addenda. Default = Not Required.
EAN-13 Beginning with 290 Addenda Required
This setting programs the scanner to require a 5 digit addenda only on EAN-13
barcodes that begin with “290.” The following settings can be programmed:
Require 5 Digit Addenda : All EAN-13 barcodes that begin with “290” must have a
5 digit addendum. The EAN-13 barcode with the 5 digit addendum is then trans-
mitted as a single, concatenated barcode. If a 5 digit addendum is not found within
the
Addenda Timeout period, the EAN-13 barcode is discarded.
Note: If you are using EAN-13 Beginning with 290 Addenda Required (page 167), this
setting will take precedence.
2 Digit Addenda On
* 2 Digit Addenda Off
5 Digit Addenda On
* 5 Digit Addenda Off
Required
* Not Required