LSC Lighting CLARITY LX Series v.1 - Manual (Page 18)

Desktop Clarity Clarity
Operator Manual
Page 8
Changing the UAC Setting – Option 2
 If you have not set the UAC as described in option 1 above and the pop-up dialog box
appears:
 Click on “Change when these notifications appear.”
 On the User Access Control Settings window that appears, move the slider all the way to
the bottom then press OK.
3.6 DEMO MODE
If Clarity is run without a USB dongle it will run in Demo mode. Demo mode has full functionality
but the intensity of all fixtures will black out and all non-fadable channels will freeze for a short
period on a regular basis. It is therefore not suitable for running a show, however it is ideal for
training and demonstrations or to create off line shows that can be run on a purchased version
of Clarity or on a LX console.
3.7 DESKTOP DMX OUTPUT
DMX512 output is obtained by connecting any of the following devices to the USB port of your
computer. Multiple devices can be connected.
 LSC Clarity QX1 interface provides 1 universe of DMX output.
 LSC Clarity QX2 interface provides up to 2 universes of DMX output.
 LSC Clarity VX10 wing provides up to 2 universes of DMX output.
 LSC Clarity VX20 wing provides up to 4 universes of DMX output.
QX1
Provides 1 universe of DMX output
QX2
Provides 2 universes of DMX output
Slider set to bottom