Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) - Manual (Page 104)

IQOYA SERV/LINK user manual
104
● Parameters related to the IP audio stream received from the remote party
instance. By default, the input with the same number as the output is
allocated.
IP codec parameter Type Description
Use SIP signaling Read/Write Check this box if you want to establish connections via SIP (through a
SIP infrastructure or directly). Checking this box brings up the SIP
configuration tab.
Jitter buffer size(ms) Read/Write Size of the jitter buffer for the IP audio stream received from the remote
party in milliseconds. The larger the buffer, the more the IP codec
instance is immune to the network jitter but the higher the latency.
Audio stream listening port Read/Write Number of the UDP port used by the IP codec instance to listen to the IP
audio stream coming from the remote party.
FEC stream listening port Read/Write Number of the UDP port used by the IP codec instance to listen to the
FEC stream coming from the remote party if there is one.
Click on the chevron to access to these advanced parameters:
RTCP listening port Read/Write Number of the UDP port used to listen to the RTCP traffic related to the
audio stream coming from the remote party.
RTCP listening port related
to FEC Read/Write Number of the UDP port used to listen to the RTCP traffic related to the
FEC stream coming from the remote party.
Audio stream loss duration
(ms) Read/Write When the IP codec instance no longer receives the IP audio stream from
the remote party for a duration equal to this parameter value, a hang-up