Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) - Manual (Page 142)

IQOYA SERV/LINK user manual
● 2 milliseconds fixed latency for reception.
● Primary network only .
● 100 Mbps or slower connections are not supported.
It is necessary to enable the AES67 mode of the LX-DANTE interface, through the Dante controller.
Select the LX-DANTE interface, and go to the “AES67 Config” tab.
Apply “Clear Config” and reboot the Dante interface when enabling or disabling AES67 mode.
Common sense precautions should also avoid audio mishandling:
● If you modify the device labels, reboot the Dante interface after label modifications to update the AES67 signal name
announcement
● Do not change the bit depth (default 24 bit) from Dante Controller or the console after enabling the AES67 mode.
● AES67 is Multicast only : create AES67 multicast transmission streams in Device View as usual, but tick “AES67 flow” first.
● In the Routing tab on Dante Controller, the non-Dante AES67 devices will appear in blue as the transmitters.
142