Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) - Manual (Page 96)

IQOYA SERV/LINK user manual
96
9.2.1.1 Connections −> Network −> Eth0 / Eth1
These two pages allow configuring the two network ports of IQOYA SERV/LINK.
Click on a parameter field (“Status” for instance) to enter the editing mode.
Parameter Type Description
Internet interface name Read Displays the name of the Eth port: Eth0 or Eth1
Status Read/Write This parameter allows enabling/disabling the interface
Default value=Running
Possible values:
Running: Eth port is enabled.
Stopped; Eth port is disabled
Speed and duplex mode
obtained Read Displays the current speed and mode of the Eth interface.
Speed and duplex mode asked Read/Write Allows selecting the working mode of the Eth interface. Possible
values are as follows:
We recommended to avoid the “Auto-negotiation” mode. Select the
mode supported by the network node connected the IQOYA.