Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) - Manual (Page 52)

IQOYA SERV/LINK user manual
52
8.1.4.3 Preferences −> Auxiliary data −> UDP
This page allows defining the UDP ports used for receiving and /or sending serial data over IP.
Serial data received via a UDP port are inserted in the IP audio stream, provided that this UDP port has been
selected as the source of auxiliary data to be tunneled.
For an Icecast/Shoutcast, serial data have to conform to the standard ICY-metadata syntax.
8.2 Audio I/Os category of menus
This category gathers all the menus allowing for the configuration of the inputs that can be encoded, and the
outputs that play decoded audio.
Parameter Type Description
Socket name Read/Write Name given to the UDP socket. This name allows selecting the
socket for tunneling data, in the Send−>IPService and
Receive−>Program pages.
Enable Read/Write Yes: socket is enabled. No, socket is disabled.
Mode Read/Write Input: IQOYA freads the data to be tunneled from the socket.
Output: IQOYA sends data through this socket.
Port Read/Write UDP port of the socket