Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) - Manual (Page 145)

IQOYA SERV/LINK user manual
13.2.1 In what kind of application the HA service is to be used?
HA service is to used anytime a 1+1 redundancy is required for encoding, for decoding, and for transcoding.
The floating IP address (VIP) is useful for decoding and transcoding applications, as it allows the two units to receive unicast
streams. It is also useful for accessing the WEB pages of the active unit.
13.2.2 Configuration of the HA service
The configuration of the HA service is done from one and only one of the two IQOYA SERV/LINK to be paired. The device
from which you configure the HA service will get the active role.
⚠
The device on which you configure the HA service will push its audio configuration to the paired device,
overwriting the current audio configuration of the paired device. This uses the FTP protocol, which must be enabled
and configured on both units.
To configure the HA service follow these steps:
● Connect to one of the IQOYA SERV/LINK. The IQOYA SERV/LINK you will connect to will get the active role once
the configuration is complete.
● Go to the HA service configuration page. The configuration page of the HA service is accessible from the menu:
Preferences→Services→High Availability
145