Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) - Manual (Page 126)

IQOYA SERV/LINK user manual
126
9.3.2.2 Advanced settings −> Services −> FTP
FTP is useful typically for managing the backup playlists and sound files on IQOYA’s internal storage
(uploading/deleting).
FTP service is disabled by default.
Playlist and sound files have to be stored in folder DEVICE_STORAGE.
9.3.2.3 Advanced settings −> Services −> SSH
This page allows enabling/disabling the SSH service on IQOYA.
SSH is mainly to be used for advanced diagnostics.
9.4 Audio I/Os category of menus
This category of menus and the pages they allow to reach are identical in "Remote Broadcasting" mode of use
and in "Program Distribution" mode of use. Please refer to their descriptions in the “Program Distribution” section
of this manual, paragraph
9.2 Audio I/Os category of menus .
Click on the “Service activation” field.
Select “Yes” to enable the FTP
service, “No” to disable it.
If necessary, you may change the
port used for FTP (default value is
21).
Parameter “Bandwidth limitation”
allows limiting the network
bandwidth of the FTP traffic.
Click on “Apply” to confirm the
changes.
Note that a username and password
are required to establish an FTP
connection to IQOYA SERV/LINK.
Username is: ftp. Password is the
administrator password, by default:
iqoya.