Iqoya serv/link user manual 73 – Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) User Manual
Page 73
IQOYA SERV/LINK user manual
73
Parameter
Type
Description
Name
Read/Write
Give a name to this TS IP service.
Synchronous AoIP
Read/Write
Set to “None” in MPEG-TS
Encapsulation
Read/Write
Select MPEG-TS SPTS if only one audio program is to be declared in the TS stream.
Select MPEG-TS MPTS if several audio programs are to be declared in the TS stream.
DVB Mode
Read/Write
Set this parameter to “Yes” to include the following DVB information tables into the stream:
CAT, EIT, NIT, SDT, TDT, TSDT. Note that CAT and EIT are dummy tables inserted for
compatibility with DVB.
Set DVB Mode to “No” if you do not need the TS to carry the DVB information tables.
Programs
If MPEG-TS MPTS is selected, several programs can be inserted in the TS stream.
Name
Read/Write
Select the Program to be streamed from the list. The following formats are supported in the
MPEG-TS stream: MPEG Layer2, MPEG Layer 3, AAC. The name of the selected program
is the name on the Service in the TS stream.
Number
Read/Write
Enter the program number (1 to 65535)
PID (PMT)
Read/Write
Enter the Program Map Table PID (16 to 8190)