Vivotek S Series IZ9361-EH 1080p Outdoor Network Bullet Camera with Heater User Manual
Page 134
VIVOTEK
134 - User's Manual
A green bar indicates that even though motions have been detected, the event has not been triggered
because the image variations still fall under the preset threshold.
If you want to configure other motion detection settings for day/night/schedule mode (e.g., for a different
lighting condition), please click
Profile
to open the Motion Detection Profile Settings page as shown
below. Another three motion detection windows can be configured on this page.
Larger than the
min. item size
Photos or videos can be captured instantly and configured to be sent to a remote server (via an Email or
FTP server). For more information on how to configure an event setting, please refer to Event settings on
Please follow the steps beolw to set up a profile:
1. Create a new motion detection window.
2. Click the
Profile mode
tab.
3. Select the applicable Schedule mode. Please manually enter a time range.
4. Click
Save
to enable the settings and click
Close
to exit the page.