Vivotek S Series IZ9361-EH 1080p Outdoor Network Bullet Camera with Heater - Manual (Page 410)

VIVOTEK
410 - User's Manual
© 2020 VIVOTEK INC. All Right Reserved
256
PARAMETER VALUE DESCRIPTION
addpos <Text string less than
40 characters> Add one preset location to the preset list.
delpos <Text string less than
40 characters> Delete preset location from the preset list.
return <return page> Redirect to the page <return page> after the parameter is
assigned. The <return page> should be the relative path
according to the root of camera. If you omit this
parameter, it will redirect to an empty page.
* If the <return page> is invalid path, it will ignore this
parameter.
8.10 IP Filtering for ONVIF
Syntax: <product dependent>
http://< servername >/cgi-bin/admin/ipfilter.cgi?type[=<value>]
http://< servername >/cgi-bin/admin/ipfilter.cgi?method=add<v4/v6>&ip= <ipaddress> [&index=<val
ue>][&return=< return page >]
http://< servername >/cgi-bin/admin/ipfilter.cgi?method=del<v4/v6>&index=<value>[&return=< retu
rn page >]
PARAMETER
VALUE DESCRIPTION
type NULL Get IP filter type
allow, deny Set IP filter type
method addv4 Add IPv4 address into access list.
addv6 Add IPv6 address into access list.
delv4 Delete IPv4 address from access list.
delv6 Delete IPv6 address from access list.
ip <IP address> Single address: <IP address>
Network address: <IP address / network mask>
Range address:<start IP address - end IP address>
index <value> The start position to add or to delete.
8.11 UART HTTP Tunnel Channel (capability_nuart > 0)
Note: This request requires Operator privileges.
Method: GET and POST