Vivotek S Series IZ9361-EH 1080p Outdoor Network Bullet Camera with Heater - Manual (Page 393)

VIVOTEK
User's Manual - 393
© 2020 VIVOTEK INC. All Right Reserved
238
NAME VALUE SECURITY
(get/set) DESCRIPTION
stopbit 1,2 4/4 "1" : One stop bit is transmitted to
indicate the end of a byte.
"2" : Two stop bits are transmitted to
indicate the end of a byte.
If you want to transfer the stopbit for
150% of the normal time used to
transfer one bit, the
uart_i<0~(n-1)>_stopbit should be set
as 2 and the uart_i<0~(n-1)>_databit
set as 5 as well.
uartmode rs485 4/7 RS485 mode.
7.44 Lens Configuration
Group: lens for n channel products
n denotes the value of "capability_nvideoin"
(capability_image_c<0~(n-1)>_lensconfiguration_support = 1)
NAME VALUE SECURITY
(get/set) DESCRIPTION
selected <string> 6/7 Current selected lens profile.
e.g. lens_selected=lens_default_i0, it
means choosen lens configuration is i0
lens of default group.
Group:
lens_default
NAME VALUE SECURITY
(get/set) DESCRIPTION
totalnumbers 0,<positive
integer>
6/7 Totoal support number of the default
lens profiles
Group:
lens_user
NAME VALUE SECURITY
(get/set) DESCRIPTION
totalnumbers 0,<positive
integer>
6/7 Totoal support number of the user lens
profiles
© 2020 VIVOTEK INC. All Right Reserved
239
Group: lens_default_i<0~(n-1)>
n denotes the value of "lens_default_totalnumbers"
NAME VALUE SECURITY
(get/set) DESCRIPTION
name <string> 6/7 Default lens name
Group:
lens_user_i<0~(n-1)>
n denotes the value of "lens_user_totalnumbers"
NAME VALUE SECURITY
(get/set) DESCRIPTION
name <string> 6/7 User-defined lens name
7.45 Fisheye Info.
Group: fisheyeinfo (capability_fisheye > 0)
NAME VALUE SECURITY
(get/set) DESCRIPTION
revisedcenteraxis <coordinate> 1/7 The actual center axis coordinate
radius 0, <positive
integer> 1/7 The actual center radius
7.46 Fisheye Local Dewarp Setting
Group: fisheyedewarp_c<0~(n-1)> (capability_fisheyelocaldewarp_c<0~(n-1)> > 0)
n denotes the value of "capability_nvideoin", m denotes the value of "capability_nmediastream"
NAME VALUE SECURITY
(get/set) DESCRIPTION
panspeed -5 ~ 5 1/4 Pan speed of regional view
tiltspeed -5 ~ 5 1/4 Tilt speed of regional view
zoomspeed -5 ~ 5 1/4 Zoom speed of regional
s<0~(m-2)>_panora
ma_panstart 0~359 1/4 Initial pan position of panorama view.
(only available for 1P and 2P mode at
ceiling or floor mount)
s<0~(m-2)>_region_
pan -90~359 1/4 Pan home angle of regional view (for
1R mode)
Pan range of ceiling/floor mount is
[0~359].
Pan range of wall mount is [-90~90].