Vivotek S Series IZ9361-EH 1080p Outdoor Network Bullet Camera with Heater - Manual (Page 161)

VIVOTEK
User's Manual - 161
© 2020 VIVOTEK INC. All Right Reserved
6
Revision History
Version Issue date
Editor Comment
V1.0a 2015/03/11 Kelly 1. Initial draft
V1.0b 2015/04/24 Kelly 1. Fixed bugs
V1.0c 2015/05/18 Kelly 1. Fixed bugs
2. Add fisheye parameters and cgi
3. Remove videoinpreview and imagepreview parameters
4. Remove event_i<0~2>_exttriggerstatusN parameters
5. Remove videoin_c0_
s<0~m-1>_<codec>_smartstream_background_qvalue, and
videoin_c0_
s<0~m-1>_<codec>_smartstream_foreground_qvalue
6. Modify capability parameters
a
、
modify the parameters of capability_daynight group to
capability_daynight_cX group
b
、
remove capability_image_wdrc
c
、
remove capability_nir
d
、
add capability_image_c<n>_defog_mode/
capability_image_c<n>_defog_strength/
capability_image_c<n>_defog_supportlevel/
capability_image_c<n>_defog_affect
e
、
remove capability_image_c<n>_defog/
capability_image_c<n>_defogaffect
f
、
add capabiliy_fisheyelocaldewarp_c<n>
g
、
add capability_videoin_c0_fisheye_mounttype
h
、
add capability_image_c<n>_lensconfiguration_support
i
、
add capability_videoin_c<n>_nprivacymask
j
、
remove capability_media_snapshot_sizepersecond
V1.0d 2015/5/26 Logic 1. Fix bugs
2. Modify description of exposurewin group
3. Add recording_i<0~1>_maxretentiontime description
4. Modify capability parameters
a
、
remove capability_image_c0_blc
b
、
add capability_image_c0_aespeedsupportlevel
V1.0e 2015/6/11 Logic 1. Fix bugs
2. Remove daymode from profile policy
3. Add "Area Zoom" eptz camctrl cgi description
V1.0f 2015/6/26 Logic 1. Fix bugs
© 2020 VIVOTEK INC. All Right Reserved
7
Version Issue date Editor Comment
2. Make description that polygon qvga and polygon px in motion
are not recommended to use
3. Add PIR group
4. Modify the description of capability_remotefocus,
camctrl_c<0~(n-1)>_isptz,
network_rtsp_s<0~capability_nmediastream-1>_accessname
and
network_http_s<0~capability_nmediastream-1>_accessname
V1.1a 2015/07/23 Kelly 1. Add videoin_minexposure parameter
V1.1b 2015/08/05 Kelly 1. Add capability_image_c<0~(n-1)>_wdrpro_description
parameter
2. Modify the lens configuration interface and cgi
3. Fix bugs
V1.2a 2015/08/17 Kelly 1. Modify capability_camctrl_httptunnel to
capability_camctrl_ptztunnel
2. Remove camctrl_enablehttptunnel parameter
3. Modify the description of
capability_videoin_c<0~(n-1)>_mode<0~(m-1)>_defaultsetting
_s<0~(j-1) group
4. Modify the description of capability_fisheye
5. Modify the description of capability_smartstream group
V1.3a 2015/09/01 Kelly 1. Add vadp_schedule group
2. Modify the value type of
capability_image_c<0~(n-1)>_wdrpro_description,
capability_image_c<0~(n-1)>_wdrpro_supportlevel,
capability_image_<0~(n-1)>_wdrc_supportlevel,
capability_image_<0~(n-1)>_defog_supportlevel
3. Modify the description of capability_camctrl_ptztunnel,
capability_image_c<0~(n-1)>_wdrc_supportlevel,
capability_tamperingmode
4. Add these parameters:
capability_videoin_c<0~(n-1)>_dgop_support,
videoin_c<0~(n-1)>_ s<0~(m-1)>_h264_dgop_enable,
videoin_c<0~(n-1)>_ s<0~(m-1)>_h265_dgop_enable,
eptz_c<0~(n-1)>_rotatespeed
V1.4a 2015/09/21 Kelly 1. Modify the description of
videoin_c<0~(n-1)>_whitebalance,