Vivotek S Series IZ9361-EH 1080p Outdoor Network Bullet Camera with Heater - Manual (Page 81)

VIVOTEK
User's Manual - 81
► If the default ports are already used by other devices connected to the same router, the Network
Camera will select other ports for the Network Camera.
► If UPnP TM is not supported by your router, you will see the following message:
Error: Router does not support UPnP port forwarding.
► Steps to enable the UPnP TM user interface on your computer:
Note that you must log on to the computer as a system administrator to install the UPnP TM
components.
1. Go to Start, click Control Panel , then click Add or Remove Programs .
2. In the Add or Remove Programs dialog box, click Add/Remove Windows Components .
3. In the Windows Components Wizard dialog box, select Networking Services and click
Details .
NOTE: