1 video input setting per channel – Vivotek S Series IZ9361-EH 1080p Outdoor Network Bullet Camera with Heater User Manual

Page 213

Advertising
background image

VIVOTEK

User's Manual - 213

© 2020 VIVOTEK INC. All Right Reserved

58

NAME

VALUE

SECURITY
(get/set)

DESCRIPTION

<1~8000>,
<5~8000>,
etc.

* Available value is
listed in
"capability_image_
c<0~(n-1)>_exposu
re_minrange"

5~32000 => 1/5s ~ 1/32000s
1~8000 => 1s ~ 1/8000s
5~8000 => 1/5s ~ 1/8000s
etc.
* Only available when
"capability_image_c<0~(n-1)>_exposu
re_minrange" != "-"
* Only valid when
"piris_mode"=manual or
"irismode"=fixed
* Only available when
"capability_image_c<0~(n-1)>_exposu
re_rangetype" is "twovalues".
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.

maxexposure

<product dependent>

<1~32000>,
<5~32000>,
<1~8000>,
<5~8000>,
etc.

* Available value is
listed in
"capability_image_
c<0~(n-1)>_exposu
re_maxrange"

4/4

Maximum exposure time
1~32000 => 1s ~ 1/32000s
5~32000 => 1/5s ~ 1/32000s
1~8000 => 1s ~ 1/8000s
5~8000 => 1/5s ~ 1/8000s
etc.
* This parameter may also restrict
image frame rate from sensor due to
sensor generates a frame per
exposure time. Ex: If this is set to 1/5s
~ 1/8000s and camera takes 1/5s on
the night, then sensor only outputs 5
frame/s.
* Only available when
"capability_image_c<0~(n-1)>_exposu
re_maxrange" != "-"
* Only valid when
"piris_mode"=manual or

© 2020 VIVOTEK INC. All Right Reserved

59

NAME

VALUE

SECURITY
(get/set)

DESCRIPTION

"irismode"=fixed
* Only available when
"capability_image_c<0~(n-1)>_exposu
re_rangetype" is "twovalues".
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.

enablepreview

<boolean>

1/4

Usage for UI of exposure settings.
Preview settings of video profile.
* Only available when
"capability_image_c<0~(n-1)>_exposu
re_mode" !=0
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.

7.8.1

Video Input Setting per Channel

Group:

videoin_c<0~(n-1)>

for n channel products, and m is stream number

n denotes the value of "capability_nvideoin", m denotes the value of "capability_nmediastream"

NAME

VALUE

SECURITY(
get/set)

DESCRIPTION

cmosfreq

50, 60

4/4

CMOS frequency.
* Only available when "
capability_videoin_type " is 2

mode

0 ~
"capability_videoin_c<0~(
n-1)>_nmode"-1

4/4

Indicate the video mode on use.

whitebalance

<product
dependent>

auto,
panorama,
manual,
rbgain,

4/4

Modes of white balance.

"auto"

: Auto white balance

"panorama"

: indicates that camera

would try to balance the white

Advertising