Vivotek S Series IZ9361-EH 1080p Outdoor Network Bullet Camera with Heater - Manual (Page 167)

VIVOTEK
User's Manual - 167
© 2020 VIVOTEK INC. All Right Reserved
12
Version Issue date Editor Comment
4. Modify the value range description of image_c0_restoreatwb
V1.9a 2016/07/06 Kelly 1. Add these parameters:
capability_image_c<0~(n-1)>_aespeedsupportsensitivity
2. Add wireless group
3. Add wireless cgi
(connect_ap.cgi/getwirelessinfo.cgi/getwlsignalstrength.cgi/sta
rt_wps.cgi) in chapter 8.
4. Add these parameters:
capability_newtwork_dualmode,
capability_wireless_apmode_enable,
capability_wireless_apmode_ssidprefix,
capability_image_c<0~(n-1)>_exposure_qualityprioritymode_af
fect
5. Modify the description of these parameters:
videoin_c<0~(n-1)>_exposuremode,
videoin_c<0~(n-1)>_profile_i<0~(m-1)>_exposuremode
6. Remove these parameters:
capability_peripheral_c<0~(n-1)>_watersprary_support,
capability_peripheral_c<0~(n-1)>_wiper_support
7. Add camclean group and cgi (washerctrl.cgi)
V1.9b 2016/08/03 Sarah 1. Modify the description of ircutcontrol group
V1.9c 2016/08/24 Sarah 1. Add these parameters:
capability_ peripheral_c<0~(n-1)>_shockdetection_support
camctrl_preset_i<0~(capability_npreset -1)>_focussetting
2. Add shock group
3. Add the focus setting cgi in camctrl group
4. Modify the camctrl cgi for set the ptz preset with focus mode
V1.9d 2016/09/09 Sarah 1. Add these parameters:
capability_peripheral_c<0~(n-1)>_devicecontrol,
capability_peripheral_c<0~(n-1)>_heater_support,
2. Remove these parameters:
capability_thermal_support,
capability_thermal_controlmode,
capability_thermal_temperaturedetection,
capability_peripheral_c<0~(n-1)>_shockdetection_support,
3. Modify the description of these parameters:
capability_peripheral_c<0~(n-1)>_washer_support
© 2020 VIVOTEK INC. All Right Reserved
13
Version Issue date Editor Comment
4. Remove washerctrl.cgi
5. Add peripheral cgi
6. Remove camclean group
V1.9e 2016/10/14 Sarah 1. Add these parameters:
capability_image_c<0~(n-1)>_focuswindow_nwindow,
capability_image_c<0~(n-1)>_focuswindow_range,
2. Modify the description of focuswindow group
V2.0a 2016/10/28 Sarah 1. Modify the description of these parameters:
capability_image_c<0~(n-1)>_focuswindow_range,
2. Modify the the security level of these parameters:
network_pppoe_pass,
network_ieee8021x_password,
network_ieee8021x_privatekeypassword,
ddns_<provider>_passwordkey,
server_i<0~4>_http_passwd,
server_i<0~4>_ftp_passwd,
server_i<0~4>_email_passwd,
server_i<0~4>_ns_passwd,
snmp_authpwrw,
snmp_authpwro,
snmp_encryptpwrw,
snmp_encryptpwro,
security_use_i0_pass,
3. Add these parameters:
network_ftp_enable,
event_i<0~2>_action_cutsom<0~2>_enable,
event_i<0~2>_action_cutsom<0~2>_name,
4. Modify the cgi descriptions of camea control/preset
locations/recall/3D privacy mask/fisheye local dewarp camera
control/IP filtering for ONVIF/ virtual input/IP filtering/ePTZ
preset locations/ePTZ recall/ePTZ camera control/account
management in chapter 8
V2.1a 2016/12/07 Sarah 1. Add these parameters:
capability_audio_aecswitch,
audioin_c0_aec_enable,
2. Modify the description of these parameters:
event_i<0~2>_action_goto_sync,