19 express link, 20 upnp presentation, 21 upnp port forwarding – Vivotek S Series IZ9361-EH 1080p Outdoor Network Bullet Camera with Heater User Manual

Page 279: 22 system log, 23 snmp

Advertising
background image

VIVOTEK

User's Manual - 279

© 2020 VIVOTEK INC. All Right Reserved

124

NAME

VALUE

SECURITY
(get/set)

DESCRIPTION

enable

<boolean>

6/6

Enable or disable the dynamic DNS.

provider DyndnsDynamic,

DyndnsCustom,
Safe100

6/6

DyndnsDynamic => dyndns.org
(dynamic)
DyndnsCustom => dyndns.org
Safe100 => safe100.net

<provider>_hostnam
e

string[128]

6/6

Your DDNS hostname.

<provider>_usernam
eemail

string[64]

6/6

Your user name or email to login to
the DDNS service provider

<provider>_passwor
dkey

string[64]

7/6

Your password or key to login to the
DDNS service provider.

7.19

Express Link

Group:

expresslink

PARAMETER

VALUE

SECURITY
(get/set)

DESCRIPTION

enable

<boolean>

6/6

Enable or disable express link.

state onlycheck,

onlyoffline,
checkonline,
badnetwork

6/6

Camera will check the status of network
environment and express link URL

url

string[64]

6/6

The url user define to link to camera

7.20

UPnP Presentation

Group:

upnppresentation

NAME

VALUE

SECURITY
(get/set)

DESCRIPTION

enable

<boolean>

6/6

Enable or disable the UPnP
presentation service.

7.21

UPnP Port Forwarding

Group:

upnpportforwarding

© 2020 VIVOTEK INC. All Right Reserved

125

NAME

VALUE

SECURITY
(get/set)

DESCRIPTION

enable

<boolean>

6/6

Enable or disable the UPnP port
forwarding service.

upnpnatstatus

0~3

6/7

The status of UPnP port forwarding,
used internally.
0 = OK, 1 = FAIL, 2 = no IGD router, 3 =
no need for port forwarding

7.22

System Log

Group:

syslog

NAME

VALUE

SECURITY
(get/set)

DESCRIPTION

enableremotelog

<boolean>

6/6

Enable remote log.

serverip

<IP address>

6/6

Log server IP address.

serverport

514, 1025~65535 6/6

Server port used for log.

level

0~7

6/6

Levels used to distinguish the
importance of the information:
0: LOG_EMERG
1: LOG_ALERT
2: LOG_CRIT
3: LOG_ERR
4: LOG_WARNING
5: LOG_NOTICE
6: LOG_INFO
7: LOG_DEBUG

setparamlevel

0~2

6/6

Show log of parameter setting.
0: disable
1: Show log of parameter setting set
from external.
2. Show log of parameter setting set
from external and internal.

7.23

SNMP

Group:

snmp

(capability_protocol_snmp > 0)

Advertising