Vivotek S Series IZ9361-EH 1080p Outdoor Network Bullet Camera with Heater User Manual
Page 22
VIVOTEK
22 - User's Manual
Internet connection with static IP
Choose this connection type if you are required to use a static IP for the Network Camera.
Please refer to LAN setting on page 79 for details.
Internet connection via PPPoE (Point-to-Point over Ethernet)
Choose this connection type if you are connected to the Internet via a DSL Line. Please refer to
Configure the router, virtual server or firewall, so that the router can forward any data coming
into a preconfigured port number to a network camera on the private network, and allow data
from the camera to be transmitted to the outside of the network over the same path.
From
Forward to
122.146.57.120:8000
192.168.2.10:80
122.146.57.120:8001
192.168.2.11:80
...
...
When properly configured, you can access a camera behind the router using the HTTP request
such as follows: http://122.146.57.120:8000
If you change the port numbers on the Network configuration page, please open the ports ac
-
cordingly on your router. For example, you can open a management session with your router to
configure access through the router to the camera within your local network. Please consult your
network administrator for router configuration if you have troubles with the configuration.
For more information with network configuration options (such as that of streaming ports),
please refer to Configuration > Network Settings. VIVOTEK also provides the automatic port for
-
warding feature as an NAT traversal function with the precondition that your router must support
the UPnP port forwarding feature.