Vivotek S Series IZ9361-EH 1080p Outdoor Network Bullet Camera with Heater User Manual

Page 433

Advertising
background image

VIVOTEK

User's Manual - 433

© 2020 VIVOTEK INC. All Right Reserved

278

PARAMETER

VALUE

DESCRIPTION

getpanangle

<integer>

Get the current pan angle.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"

gettilt

0, <positive integer> Get the current tilt position.

*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"

gettiltangle

<integer>

Get the current tilt angle.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"

getzoom

0, <positive integer> Get the current zoom position.

getratio

<decimal>

Get the current zoom ratio.

getfocus

0, <positive integer> Get the current focus position.

getminspeedlv 0, <positive integer> Get the minimum speed level of the PTZ control. Normally,

the speed level is ‘0,’ which denotes halting a continuous
movement.

getmaxptspeedlv 0, <positive integer> Get the maximum speed level of pan/tilt moving.

*Only available when
"capability_camctrl_c<0~(n-1)>_buildinpt" > 0

getmaxzspeedlv 0, <positive integer> Get the maximum speed level of zoom moving.
getmaxfspeedlv 0, <positive integer> Get the maximum speed level of focus moving.
getminpan

0, <positive integer> Get the lower limit for pan position.

*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"

getmaxpan

0, <positive integer> Get the upper limit for pan position.

*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"

getminpanangle <integer>

Get the lower limit for pan angle.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"

getmaxpanangle <integer>

Get the upper limit for pan angle.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"

getmintilt

0, <positive integer> Get the lower limit for tilt position.

*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"

getmaxtilt

0, <positive integer> Get the upper limit for tilt position.

*Only available when bit1 of

© 2020 VIVOTEK INC. All Right Reserved

279

PARAMETER

VALUE

DESCRIPTION
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"

getmintiltangle <integer>

Get the lower limit for tilt angle.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"

getmaxtiltangle <integer>

Get the upper limit for tilt angle.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"

getminzoom

0, <positive integer> Get the lower limit for zoom position.

getmaxzoom

0, <positive integer> Get the upper limit for zoom position.

getmaxdzoom 0, <positive integer> Get the upper limit for digital zoom position.
getmaxratio

<decimal>

Get the maximum ratio of optical zoom.
* We support this parameter when the version number
(getversion) is equal or greater than 5.0.0.14

getmaxdratio

<decimal>

Get the maximum ratio of digital zoom.
* We support this parameter when the version number
(getversion) is equal or greater than 5.0.0.14

getminfocus

0, <positive integer> Get the lower limit for focus position.

getmaxfocus

0, <positive integer> Get the upper limit for focus position.

8.27

Recall

(capability_camctrl_c<0~(n-1)>_zoommodule = 1)

Note:

This request requires Viewer privileges.

Method:

GET


Syntax:
http://<

servername

>/cgi-bin/viewer/recall.cgi?

recall=<value>[&channel=<value>][&return=

<return page>

]


PARAMETER

VALUE

DESCRIPTION

recall

string[30]

One of the present positions to recall.

channel 0~"

capability_nvideoin"-1

Channel of the video source.


Advertising