Vivotek S Series IZ9361-EH 1080p Outdoor Network Bullet Camera with Heater - Manual (Page 379)

VIVOTEK
User's Manual - 379
© 2020 VIVOTEK INC. All Right Reserved
224
diskmode seamless,
manageable
1/6 “seamless” indicates enable seamless
recording.
“manageable” indicates disable
seamless recording.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.
maxconnection 3 1/7 Maximum number of connected
seamless streaming.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.
triggerrecord <boolean> 1/7 Indicate whether seamless recording is
recording to local storage or not at
present.
(Read only)
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.
guid<0~(k-1)>_id
string[127] 1/7 The connected seamless streaming ID.
(Read only)
* k denotes the value of
"seamlessrecording_c<0~(n-1)>_maxco
nnection"
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.
guid<0~(k-1)>_number 0~3 1/7 Number of connected seamless
streaming with guid<0~(k-1)>_id.
(Read only)
* k denotes the value of
"seamlessrecording_c<0~(n-1)>_maxco
nnection"
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.
© 2020 VIVOTEK INC. All Right Reserved
225
7.38 VIVOTEK Application Development Platform Setting
Group: vadp
NAME VALUE SECURITY
(get/set) DESCRIPTION
version <string> 6/7 Indicate the VADP version.
resource_total_memory 0,<positive
integer>
6/7 Indicate total available memory size
for VADP modules.
resource_total_storage 0,<positive
integer>
6/7 Indicate total size of the internal
storage space for storing VADP
modules.
resource_free_memory 0,<positive
integer>
6/7 Indicate free memory size for VADP
modules.
resource_free_storage 0,<positive
integer>
6/7 Indicate current free storage size for
uploading VADP modules.
module_number 0,<positive
integer>
6/7 Record the total module number that
already stored in the system.
module_order string[40] 6/6 The execution order of the enabled
modules.
module_save2sd <boolean> 6/6 Indicate if the module should be
saved to SD card when user want to
upload it.
If the value is false, save module to
the internal storage space and it will
occupy storage size.
number string[128] 6/7 This number is used to register
license key for VADP application.
status string[40] 6/7 Indicate the hardware restore status
developer_mode <Boolean> 6/6 Developer mode provide ways to
establish communication between
the developer of VADP vendor and
your camera.
* Only available when
capability_securecam_support=1.
7.38.1. VADP Settings for Each Hyperlink
Group: vadp_hyperlink_i<0~(n-1)>