Vivotek S Series IZ9361-EH 1080p Outdoor Network Bullet Camera with Heater - Manual (Page 358)

VIVOTEK
358 - User's Manual
© 2020 VIVOTEK INC. All Right Reserved
204
PARAMETER VALUE SECURITY
(get/set) DESCRIPTION
di 0,<positive
integer>
6/6 Indicate the source id of di trigger.
This field is required when trigger
condition is “di”.
One bit represents one digital input. The
LSB indicates DI 0.
* Only available when "capability_ndi" >
0
mdwin 0,<positive
integer>
6/6 Indicate the source window id of motion
detection.
This field is required when trigger
condition is “md”.
One bit represents one window.
The LSB indicates the 1
st window.
For example, to detect the 1 st and 3 rd
windows, set mdwin as 5.
mdwin0 0,<positive
integer>
6/6 Similar to mdwin. The parameter takes
effect when profile 1 of motion detection
is enabled.
vi 0,<positive
integer>
6/6 Indicate the source id of vi trigger.
This field is required when trigger
condition is “vi”.
One bit represents one digital input. The
LSB indicates VI 0.
vadp
<product dependent>
0,<positive
integer> 6/6 Indicate the source id of vadp event
notification.
Each bit corresponds to one vadp source,
and the LSB indicates source id 0.
For example, to detect event from any
one of source id 0, 1 and 3, set vadp to
11.
* Only available when vadp is listed in
"capability_supporttriggertypes"
valevel 0,1 6/6 Select audio detection event.
0: not select
1: select