NARDA 8718B - Manual (Page 101)

100 Operating the Meter
Field Strength Recorder Voltage Bar Graph
0.01 mW/cm 2 0.03 volts 1 % of Full Scale
0.50 mW/cm 2 1.50 volts Half Scale
1.00 mW/cm 2 3.00 volts Full Scale
1.01 mW/cm 2 0.03 volts 1% of Full Scale
5.0 mW/cm 2 1.50 volts Half Scale
10.0 mW/cm 2 3.00 volts Full Scale
10.1 mW/cm 2 0.03 volts 1% of Full Scale
50 mW/cm 2 1.50 volts Half Scale
100 mW/cm 2 3.00 volts Full Scale
>100 mW/cm 2 4.2-4.5 volts
"RANGE
OVERLOAD"
The recorder output has an approximate 1/4 second RC time
constant.
The recorder output
can be set to one of
three fixed ranges by
changing the bar
graph range setting.
See Bar Graph
Ranges on page 23.
N
ote