Analog output – NARDA 8718B User Manual
Page 57
56
Operating the Meter
7. To discard the contents of the meter’s memory once the
contents have been downloaded or without saving the
information, access the menu system by pressing the
function key that corresponds to the legend below
MENU on the bottom line of the display.
8. Press 8 (NEXT) to get to the Second Menu Screen.
9. Press 2 (SETTINGS).
10. A new screen will appear offering several options.
11. Press 3 (CLEAR MEMORY). A screen will appear
requesting that you confirm your request and warning
that the stored information will be lost.
12. Press F1 (CLEAR) to clear the memory or F1 (ABORT)
to return to the First Menu Screen without clearing the
memory.
S E T T I N G S
1
C L O C K
4
R G T / L E F T
2
T E M P
5
D I S P L A Y
3
C L E A R
M E M O R Y
F1
F2
F3
F4
C L E A R
M E M O R Y
C L E A R I N G
T H E
M E M O R Y
C A N
N O T
B E
R E V E R S E D
C L E A R
A B O R T
F1
F2
F3
F4
Analog Output
The 8718B Meter allows the user to output a DC voltage that is
proportional to the instantaneous measured value. When
connected to a typical chart recorder, it will provide a
continuous analog record of the measured field strength.
See Chapter 17, Operation with a Data Recorder.