NARDA 8718B - Manual (Page 47)

46 Operating the Meter
Mode 1 Logging
To initiate Mode 1 logging (a series of data points with a
reference number assigned to each data point)...
1. Press the number 1 on the keypad to select LOG
WITH REF # from the logging menu screen.
2. A screen will appear requesting that you assign a two-
digit survey number to this logging run of data points.
Use the numeric keypad to enter the two-digit number
and then press F1 (OK) or ENTER. Make note of this
number so that you can later associate this survey
number with the data points collected. If you make a
mistake, press F2 (CLR) to clear the screen and enter
a new survey number.
3. Press F4 (QUIT) or F3 (MENU) if you change your mind.
4. The meter will automatically return to the
measurement screen with new options available for
the function keys.
5. Proceed to make measurements as normal. To log
the value of the point currently being measured and
displayed on the second line of the display,
press F1 (LOG).
N E W L O G G I N G R U N :
E N T E N E W F R N O . _ _
O K C L R M E N U Q U I T
F1 F2 F3 F4
R E
1 2 . % S D T
2 7 . 5 M A X C F 1 . 0
L O G M A X E N D Q U I T
1
F1 F2 F3 F4
0
R