NARDA 8718B - Manual (Page 72)

71 Chapter 11 Using the RF Exposure Standards Feature
11
Using The RF Exposure
Standards Feature
Application
The Model 8718B Meter is always set to reference a particular
safety standard, regulation, or guidance.
The 8718B uses the referenced standard in two ways:
• The Alternate Measurement Display Screen displays
additional information about the instantaneous
measurement at a particular frequency. See Alternate
Measurement Display Screen on page 20.
• Time-averaged measurements are made to conform to
the referenced standard at the specified frequency.
Checking or Changing the Standard
To determine which standard the 8718B is currently set to
reference ...
1. Access the menu system by pressing the function key
that corresponds to the legend below MENU on the
bottom line of the display.
2. Press number 8 (NEXT) to select the Second Menu
Screen.
3. Press number 6 to select STNDS.
4. A screen will appear that specifies the current
standard. The specific level or tier will be specified for
standards with more than a single tier.