NARDA 8718B User Manual

Page 54

Advertising

Chapter 8

Data Logging

6. To log for a specific interval of time, enter a two-digit

number on the keypad. If you make a mistake entering

a number, simply continue entering numbers until the

correct value is displayed. Then press either F1 (SEC),

F2 (MIN), or F3 (HRS) and the meter will automatically

return to the measurement screen with new options

available for the function keys.

7. To log for an indeterminate interval of time (until you

tell the meter to stop or the memory is filled), press

F4 (CONT). The meter will automatically return to the

measurement screen with new options available for the

function keys.

8. Proceed to make measurements as normal. To initiate

logging, press F1 (LOG). The meter will beep every

time a data point is recorded.

9. If a specific interval of time had been selected, the

meter will automatically stop logging at the end of this

interval. To stop logging earlier or when set to an

indeterminate period of time, press F3 (END).

1 2 . 1

S T D

2 7 . 5

M A X

C F

1 . 0 0

L O G

M A X R

M E N U

Q U I T