NARDA 8718B - Manual (Page 49)

48 Operating the Meter
13. Use the numeric keypad to enter a new two-digit
survey number and then press F1 (OK) or ENTER.
Again, make note of this number so that you can later
associate this survey number with the data points
collected. If you make a mistake, press F2 (CLR) to
clear the screen and enter a new survey number. The
meter will automatically return to the logged
measurements screen.
14. To end logging altogether and return to the standard
measurement screen, press F4 (QUIT). To initiate
logging again at a later point, use the menu system to
select DATA LOG from the First Menu Screen.
Mode 2 Logging
To initiate Mode 2 logging (a series of spatially-averaged
data points with a reference number assigned to each data
point)...
1. From the main data-logging screen, press the number 2
on the keypad to select LOG AVG WITH REF # from
the logging menu screen.
2. A screen will appear requesting that you assign a two-
digit survey number to this logging run of data points.
Use the numeric keypad to enter the two-digit number
and then press F1 (OK) or ENTER. Make note of this
number so that you can later associate this survey
number with the data points collected. If you make a
mistake, press F2 (CLR) to clear the screen and enter a
new survey number.
1 L O G W I T H R E F #
2 L O G A V G W I T H R E F #
3 C O N T I N U O U S L O G G I N G
M E M Q U I T
F1 F2 F3 F4