ARRI ARRIFLEX 235 - Manual (Page 116)

116 116
Position - Positioning of the Format Marks
The format markings can be adapted to every different format.
The format markings on the ground glass serve as a reference.
To align format 1, make sure that FORMAT 1 or FORMAT
1&2 is selected. To align format 2, make sure that
FORMAT 2 or FORMAT 1&2 is selected.
To match the electronic format markings with the ground
glass markings proceed as follows:
• Point the film camera towards a bright object so that the
format markings on the ground glass are clearly visible.
• Move the cursor > with the keys Ê and Ë to the line
– POSITION 1 Ö or – POSITION 2 Ö, depending on
whether format 1 or format 2 should get adjusted. The
symbol Ö indicates that the top line and the left line can
be moved. To move the top line up and down, use the
keys Ê and Ë, to move the left line left and right, use
the keys Í and Ì.
• Move the cursor > with the keys Ê and Ë to the line
– POSITION 1 Ü or – POSITION 2 Ü, depending on
whether format 1 or format 2 should get adjusted. The
symbol Ü indicates that the lower line and the right
line can be moved. To move the lower line up and
down, use the keys Ê and Ë, to move the right line
left and right, use the keys Í and Ì.
MENU FORMAT MARKING
- FORMAT 1&2
-> - POSITION 1 Ö
- POSITION 1 Ü
- POSITION 2 Ö
- POSITION 2 Ü
- WHITE LEVEL 2
OUTSIDE LIGHT
- EXIT
Video-Assist-System