ARRI ARRIFLEX 235 - Manual (Page 99)

99 99
Load Settings
It is possible to load one out of six settings. Those new settings
will influence all adjustments that can be made electronically.
The new settings will immediately replace the
previous settings. If the old settings might be
needed, store them first as described in the next
chapter Store Settings.
• Move the cursor > with the keys Ê and Ë to the line
– LOAD SET. Pressing the key Í will switch from 1 to
2 all the way up to 6 and back to 1, the key Ì will
switch in the opposite direction. Pressing either the key
Í or Ì, will immediately load the new settings.
Store Settings
The set of settings, that are currently active, can be stored
as one out of six settings.
• Move the cursor > with the keys Ê and Ë to the line
– STORE SET. Pressing the key Í will switch from 1 to
2 all the way up to 6 and back to 1, the key Ì will
switch in the opposite direction.
• When the demanded number was reached, press the
Enter/Insert key Ñ to store this setting under the given
number. The word DONE will appear for 3 seconds
to indicate that the setting was stored. After this, the display
will return to its normal mode.
MENU LOAD/STORE
-> - LOAD SET 4
- STORE SET 4
(CONFIRM BY
ENTER)
- SET ALL
SETTINGS TO
DEFAULT
- EXIT
MENU LOAD/STORE
- LOAD SET 4
-> - STORE SET 4
(CONFIRM BY
ENTER)
- SET ALL
SETTINGS TO
DEFAULT
- EXIT
Video-Assist-System