ARRI ARRIFLEX 235 - Manual (Page 23)

23 23
With the Low-Mode Riser, plate-to-lens distance is increased,
but the plate level is now above the level of the viewfinder; a
longer plate attached to the Riser will not collide with the
viewfinder. This is especially useful in situations where rapid
switching between operation in low-mode and operation
with viewfinder is necessary.
A measuring tape hook is located camera right on the
Low-Mode Bracket, and both the Low-Mode Bracket and
Low-Mode Riser offer diverse attachment points for
additional accessories.
Side Bracket SBR-1
The 235 Side Bracket SBR-1 (K2.55015.0) ➪ photo
offers two adjustable 19mm support rods positioned
camera right for attachment of lens motors, Lightweight
Follow Focus LFF-1 (K0.60021.0) and other accessories
with rod mounts. It attaches to the 235 via the right-side
3/8“ accessory mounting point and the rosette mount.
For a further setup with the handgrip, the SBR-1 retains its
own rosette mount
Installation
support rods
Side Bracket
screws
lightweight follow focus