ARRI ARRIFLEX 235 - Manual (Page 83)

83 83
Using the on-screen menu
Please see chapter 10.4 Inserter Facilities for basics on
the On-Screen display.
In parallel to the control via keyboard, the white balance
can also be programmed via the on-screen menu.
• Enter the main menu by pressing the Enter/Insert key
Ñ for more than 3 seconds.
Go to sub menu WB/GAIN. Move the cursor > with
the keys Ê and Ë to the line – WHITE BALANCE.
Pressing the key Í will switch from Automatic White
Balance (AWB), Indoor (IND) and Outdoor (OTD) to
Manual (MAN) and back Automatic White Balance.
The key Ì will give the opposite direction.
• If white balance is on manual, the display will change.
Lines left of RED and BLUE will appear indicating that
the red and green saturation of the video image can
now be changed.
MENU WB/GAIN
-> - WHITE BALANCE IND
RED
BLUE
- MANUAL GAIN OFF
VALUE
- EXIT
MENU WB/GAIN
-> - WHITE BALANCE
MAN
RED 30
BLUE 39
- MANUAL GAIN OFF
VALUE
- EXIT
Video-Assist-System