ARRI ARRIFLEX 235 - Manual (Page 53)

53 53
9. Camera Operation
9.1 Main Camera Switch
• First switch on the mains unit (if used).
• Connect the camera to the mains unit or to the battery.
• Push the “ON/OFF” button
➪
photo to turn the
camera on. Push the “ON/OFF” button for approx. 3
seconds to turn the camera off again.
Note: When the camera power cable is unplugged
and then plugged in again, the camera will be
on or off depending on ist state before the
camera cable was unplugged.
9.2 Running and Stopping the Camera
A “RUN”-button is located on the left and on the right
side of the camera ➪ photo .
Running the Camera
If the operation control indicator glows red
while in standby, the camera is not ready and
will not run
(see “Overview of Display Symbols”).
ON/OFF button RUN button
RUN button operational control indicator
Camera Operation