ARRI ARRIFLEX 235 - Manual (Page 127)

127 127
Film Counter
The film counter is slaved to the footage counter of the film
camera. It always displays the values, which are in the camera.
Therefore there is no set or reset of film counter data on
the IVS.
• Move the cursor > with the keys Ê and Ë to the line
– FILM COUNTER. The keys Í will switch from TAKE
(M/FT), TAKE (SEC) to FTGE and back to TAKE (M/FT).
The key Ì will give the reverse order.
Note: The dimension meter or feet is taken over from
the setting of the camera. If meter are selected
there, the data in the IVS are displayed in meter.
Exit
Use exit to return to the main menu.
• Move the cursor > with the keys Ê and Ë to the line
– EXIT and press the key Í or Ì.
Note: Pressing the Enter/Insert key Ñ for more than
three seconds will cause the system to exit the on-
screen programming mode completely, regardless
of which menu is activated, with the exception
of the positioning mode.
MENU SYSTEM/STATUS
- SYSTEM LINE ON
- STATUS LINE ON
- POSITION
- BACKGROUND BOXED
-> - FILM COUNTER TAKE
(SEC)
- EXIT
MENU SYSTEM/STATUS
- SYSTEM LINE ON
- STATUS LINE ON
- POSITION
- BACKGROUND BOXED
- FILM COUNTER FTGE
-> - EXIT
Video-Assist-System