ARRI ARRIFLEX 235 - Manual (Page 42)

42 42
7.4 Attaching the Magazine,
Threading the Film
• Pull the magazine release lever ➪
photo back and
remove the cover.
• Open the camera door.
• Remove the loop protector from the magazine.
When attaching the magazine, pay attention
that the film does not get caught between the
magazine and the dovetail on the camera
opening!
• Position the back part of the magazine’s throat
assembly on the lower dovetail of the camera opening.
• With your left hand pull the film loop through the
camera opening as far as possible into the movement
block area ➪ photo .
• Before locking the magazine into place, ensure that the
film is pulled far enough into the movement block area
so that the film does not get caught between the
magazine and the magazine locking mechanism!
• Lock the magazine completely into the camera opening.
magazine opening cover magazine release lever
inching knob
movement locking lever
Camera Body