ARRI ARRIFLEX 235 - Manual (Page 96)

96 96
• Within sub menus the cursor > can be moved up and
down again by pressing the key Ê or Ë. The keys Í
or Ì will now change settings (e. g. switch the insertion
of a user text window on and off), or activates functions
(position mode of a window or EXIT).
• If the windows position mode is activated, the keys Ê
or Ë will move the window across the video image. To
leave the position mode press the Enter/Insert key Ñ
shortly.
• To go from a sub menu back to the main menu,
position the cursor > by using the keys Ê and Ë on
the line EXIT and press the key Í or Ì.
• Active lines are marked with a dash symbol –.
They can be reached with the cursor > within a menu
using the keys Ê and Ë. Lines may not be active
because the currently selected mode does not use this
feature. E.g. when gain is not in manual control mode,
the line value is not active because value cannot be
changed in the automatic control mode. In this case,
no dash symbol – is displayed and the line cannot be
reached with the cursor >. To activate this line, switch
from automatic to manual gain control mode.
Changing them immediately activates all settings.
Note: Pressing the Enter/Insert key Ñ for more than
three seconds will cause the system to exit the
on-screen programming mode completely,
regardless of which menu is activated, with the
exception of the positioning mode.
Video-Assist-System