ARRI ARRIFLEX 235 - Manual (Page 123)

123 123
If the film counter is in the take mode, the data in meter,
foot or seconds of the last take are displayed. In the mode
footage, the added length of the film through the camera
in meter or feet is displayed.
During programming the inserted data are not
fully updated (e. g. Frame Counter Information). To
get information updated, leave the on-screen display
menu by pressing the Enter/Insert key Ñ for
more than three seconds.
After powering the film camera up, no mirror
shutter angle is displayed. Data will appear
only after some revolutions of the mirror shutter.
System line and Status line are together as a package. If
both lines are on, the upper line will always be status, the
lower line system. Positioning always affects both lines.
Like all man readable information, the data is inserted as a
window on the monitor image. The window can be switched
on and off independently. Background and position can
be altered without affecting the settings of other windows.
MENU SYSTEM/STATUS
-> - SYSTEM LINE ON
- STATUS LINE ON
- POSITION
- BACKGROUND BOXED
- FILM COUNTER FTGE
- EXIT
The adjustment of the white level of the inserted data, an
inverse display and a fine adjustment of the vertical position
is described in chapters 10.4.5 White Level, Inverse and
Fine Positioning.
• Enter the System/Status submenu from the main menu.
Changing them immediately activates all settings.
Check all settings on the connected monitor.
Video-Assist-System