ARRI ARRIFLEX 235 - Manual (Page 87)

87 87
Using the on-screen menu
Please see chapter 10.4 Inserter Facilities for basics on
the On-Screen display.
In parallel to the control via keyboard, the manual gain
control can also be programmed via the on-screen menu.
Manual gain control can be switched on or off. If it is on,
specific values can be set between 0 (low gain) and 63
(high gain).
• Enter the main menu by pressing the Enter/Insert key
Ñ for more than 3 seconds.
Go to sub menu WB/GAIN. Move the cursor > with
the keys Ê and Ë to the line – MANUAL GAIN.
Pressing the key Í or Ì will switch manual gain
control off and on. If manual gain control is on, the
display will change. A line symbol – will appear
before VALUE indicating that the gain can be changes
manually.
The LED in the keyboard will follow the changes which
are made in this menu and vice versa, if this setting is
changed via the keyboard, the on-screen menu will follow.
MENU WB/GAIN
- WHITE BALANCE MAN
- RED 30
- BLUE 39
-> MANUAL GAIN OFF
VALUE
- EXIT
MENU WB/GAIN
- WHITE BALANCE MAN
- RED 30
- BLUE 39
MANUAL GAIN ON
-> - VALUE 40
- EXIT
Video-Assist-System