ARRI ARRIFLEX 235 - Manual (Page 62)

62 62
Fine-Tuning the Programmed Frame Rate (PS-Mode)
Fine-tuning of the programmed frame rate can be carried
out while the camera is running by means of the buttons
“SEL” (slower) and “SET” (faster). The setting can be
adjusted in increments of 0.001 fps.
• Push the “PS/CCU” button.
• Run the camera.
• Depress the “MODE”-button once to change to Mode 2.
• With the buttons “SEL” (slower) and “SET” (faster)
change the frame rate.
PS/CCU button
NORM button
RUN button operational control indicator
PHASE button
Shifting Phase
To film quartz-synchronized monitors, hold the “PHASE”-
button ➪ photo depressed after the camera has run up
until the horizontal bar is no longer visible in the viewfinder.
The frame rate will increase by 0.2 fps while the button is
depressed.
Camera Operation