ARRI ARRIFLEX 235 - Manual (Page 68)

68 68
• Full white balance control
In addition to the standard indoor white balance setting
witch 3200 K, an outdoor setting with 5600 K and an
automatic adjustment, red and blue channel can be fine
tuned for manual white balance
• Line Interpolation
Even further resolution in camera run mode because of
line interpolation, thus the image appears almost in field
resolution.
• Store and recall settings
All settings can be stored and recalled. By this, it is
possible for example to trim all the settings for indoor
shooting, store them, have some exterior scenes, go back
indoor and call the old settings back.
Up to 6 settings can be stored.
• Integrated frame line inserter
Frame lines can be electronically added to the video
image. This ensures that the lines are visible even in
difficult conditions. The area outside the frame lines
can be darkened electronically in 4 different steps to
emphasize the important image area.
• Camera status display
Camera status information, e.g. camera speed and film
counter data are passed on a bus interface from the
camera to the video assist and can be displayed in a
camera status line on the monitor.
• System display
Camera system information is available in the video
assist. Thus, it is possible to see camera warnings such
as movement open or low battery on the monitor.
• Integrated text inserter
Additional text like take numbers or production name
can be added to the video image by entering the text
on the IVS.
• Y/C Outputs
The usual composite outputs can be switched to an Y/C
output (S-VHS) for an even better video image without
annoying color artifacts, with or without data inserted
into the video image. The output is on two BNC sockets.
• On-Screen programming
All functions, which do not affect the image appearance
directly, such as frame lines, can be conveniently pro-
grammed with an on-screen programming menu on
the video monitor.
Video-Assist-System