ARRI ARRIFLEX 235 - Manual (Page 27)

27 27
5.3 Mains Unit NG 12/24 R
Use of the mains unit is recommended for filming in the
studio and when using electronic accessories with a high
power consumption.
• First check that the correct mains voltage is set on the
mains unit.
• Ensure that the main switch on the camera is off.
• Set the voltage switch on the mains unit to 24 V.
• Plug the battery cable KC 20S or the spiral battery
cable KC 29S into the power supply socket on the
camera and into the 24 V-socket on the mains unit.
5.4 Mains Unit NG 12/26 R
Use of the mains unit is recommended for filming in the
studio and when using electronic accessories with a high
power consumption.
• First check that the correct mains voltage is set on the
mains unit.
• Ensure that the main switch on the camera is off.
• Set the voltage switch on the mains unit to 26 V.
• Plug the battery cable KC 20S or the spiral battery
cable KC 29S into the power supply socket on the
camera and into the 26 V-socket on the mains unit.
Note: The NG 12/24 R can easily be upgraded to an
NG 12/26 R at an ARRI service center.
Power Supply